Do you know what swimming pool maintenance you should be doing each week? If not, then let us help guide you. Our goal is to help you understand the steps that go into this process so your family can safely use the pool as often as they would like. By taking the time to maintain your pool each week, you can minimize changes to your pool. That means that there are fewer checks you need to make when it comes time to go swimming! When searching for a pool service near me, let Manning Pool Service show you how to do swimming pool maintenance.
The first step when it comes to basic swimming pool maintenance is cleaning off your pool deck. This area constantly gets debris on it. You will likely find leaves, maybe some pine needles, and bugs. You could even notice a bit of trash that blew up onto your pool deck—taking the time to sweep this area off means that you avoid all that debris falling into your pool. When leaves hit the pool, they begin to decompose. That process can alter your pool’s pH, meaning you need more chemicals to keep it safe. Taking the time to sweep and clean this area 2-3 times per week can save you time and chemical expenses.
Scrubbing is a Regular Part of Weekly Swimming Pool Maintenance
Your pool will need to be scrubbed weekly to keep any algae from growing. You will need to clean areas that include:
- The ladder or steps to the pool
- Corners of the pool
- The walls of the pool
If you can, you should also scrub the bottom of the pool. However, if you have a robot or a vacuum, this is often a more effective scrubbing than you can do by hand. This should be done at least every other day each week. The more you keep up with scrubbing these areas, the fewer damage algae can do.
It would be best if you also took the time to skim your pool at least once per day. Skimmers grab hold of the small bits of debris that float around your pool. The more of these bits you can avoid hitting your filter, the better. It means that you will need to empty your filter less often, and it will continue to work better over the long run.
Make Sure Your Chemicals Are Always Within Safe Levels
One of the most important parts of ensuring your pool is safe to use in checking the chemical levels. You need to test these regularly and make small changes to the chemicals you have in your pool. We recommend you test your pool once per week unless you had significant rainfall or other events that would alter your water during the week. Your testing kit should show you the ranges of where your chemicals are safe. Our recommendations for your levels include the following:
- pH: 7.4 – 7.6
- Chlorine: 1.0 – 3.0 ppm
- Total Alkalinity: 80 – 140 ppm
- Calcium Hardness: 200 – 400
- Cyanuric Acid: 25 – 50 ppm
- Total Dissolved Solids: 500 – 5000 ppm
- Phosphates: 100 – 125 ppm
- Salt: 2700 – 3400 ppm
You also need to check the water level each week. You want the water to be approximately halfway up your skimmer. If the water is any higher, your skimmer may not get all of the debris as effectively as it could. However, if the water is too low, you may be getting air in your pump system. This could result in pump damage.
Finally, check the psi of your pool filter at the end of the swimming pool maintenance cycle. If your filter is showing that you have at least 8-10 additional psi beyond where your filter normally runs, then you should take the time to backwash your pool as well.
Manning Pool Service is Here to Help with Your Weekly Swimming Pool Maintenance
Instead of taking the time to search for “pool service near me” to do the job, you have options. You can learn to do the routine yourself or call us here at Manning Pool Service. We have been a trusted name in swimming pools for over 30 years, including pool maintenance. You can trust our experienced professionals to come out and keep your pool looking great and safe to use. Call us today to find out how we can help save you time by having us maintain your pool.
Your Weekly Swimming Pool Maintenance Guide | Manning Pool Service – Houston, TX